> ## Documentation Index
> Fetch the complete documentation index at: https://dub-3ccc829c.mintlify.site/llms.txt
> Use this file to discover all available pages before exploring further.

# Hardware

> Which interfaces and control vinyl Dub works with, and how to set up an interface Dub doesn't know.

## What you need

Dub sits between your turntables and your mixer. For the two-deck
**Performance** surface you need:

* **An audio interface with at least 4 inputs and 4 outputs**: one stereo
  pair in and one out per deck.
* **Control vinyl** on each turntable.
* **An external mixer** with line inputs. Dub has no software mixer; each
  deck leaves on its own output pair and you mix on your hardware.

## Tested hardware

| Hardware | Role | Status |
| - | - | - |
| Serato SL 3 | Interface (reference rig) | Tested |
| Serato Control CV02 vinyl | Timecode | Tested |
| Traktor Scratch MK1 vinyl | Timecode | Tested |
| Traktor Scratch MK2 vinyl | Timecode | Decoder shipped, not yet confirmed on a real pressing |
| Native Instruments Audio 6 | Interface | Known to Dub, not yet confirmed on hardware |
| Any external mixer with line inputs | The mixer | Works |
| Phase, MIDI and HID controllers | Control | Planned after 1.0 |

Other class-compliant interfaces with 4 inputs and 4 outputs should work.
Dub needs to know which channels each deck uses, which is the next section.

## Setting up your interface

Open **Preferences ▸ Audio** while Dub is running with the interface
plugged in. It shows the interface and, for each deck, the pair the
**needle comes in** on and the pair that goes **to the mixer**.

The badge on the interface says how Dub knows it:

| Badge | Meaning |
| - | - |
| **KNOWN · TESTED** | Dub ships this interface's channel map and it has been played on. Nothing to set; the routing is read-only. |
| **KNOWN · UNTESTED** | Dub ships a map for it that hasn't been confirmed on hardware yet. |
| **NOT SET UP** | Dub doesn't know this interface. Until you set it up, it runs one deck on inputs 1–2. |
| **SET BY YOU** | You routed it here. Dub remembers it by the interface's name. |

The first time you plug in an interface Dub doesn't know, it says so once
and points you to this tab.

### Routing an unknown interface

**1. Choose one deck or two**

**TWO DECKS** needs 4 inputs and 4 outputs. **ONE DECK** works on any
interface.

**2. Find each deck's input**

Channel numbers are the ones printed on the back of the interface. Drop
the needle on control vinyl and watch the meter next to each input: it
reads **timecode**, **music, not timecode**, or nothing, so the right
pair finds itself.

**3. Find each deck's output**

Press **TEST** next to a deck's output: it plays a short tone on that
pair. Whichever mixer channel lights up is that deck's channel.

Your routing applies as soon as you change it: the interface reconnects and
both decks empty, so the routing is locked while a deck is playing. If two
decks would share a pair, Dub tells you and keeps the last routing that
worked. **Forget this interface** removes your routing for it.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.