Skip to main content
The rack bar: the SAMPLES shelf on the left, the DUB SIREN box on the right The rack bar under the decks holds the SAMPLES shelf and the DUB SIREN box. The chevron at its left edge folds it away so the library gets the space; click the folded strip to bring it back.
Nothing here ships with a key. Click MAP in the status strip, click a pad or a siren shot, then press the key you want on it.

The sampler

Eight slots, 1–4 over 5–8. The heading counts what’s loaded: 3 OF 8. The same shelf appears in Prep, so a slot you load there is the pad you fire here. Samples stay loaded between launches.

Loading

Drag a track from the library or from Finder onto a slot. Dropping onto a full slot replaces it. Empty slots are dashed outlines with their number.

Playing

A sounding pad lights and a sweep crosses it, so you can see how much is left. Samples play on top of the deck, never instead of it, and each one is levelled for loudness when it loads. Rename… gives the pad your own name; leave it blank to go back to the filename. Replacing the sample clears the name.

Where samples sound

The → A pill on the heading shows the deck the samples land on: the master deck, by default. Right-click it to pin them:
  • Auto — follows the master deck
  • Deck A
  • Deck B
  • A + B

MISSING and UNREADABLE

MISSING means the file was moved or deleted. UNREADABLE means it’s there but can’t be decoded. The pad keeps its place and name; drop another file on it. See Troubleshooting.

Quick Scratch

Quick Scratch puts a sample on the deck, under the needle, and parks the tune. You scratch the sample with the turntable; press again and the tune is back.
1

Tag a sample

Right-click a quiet SAMPLES tile and pick Quick Scratch 1–4. The tile shows QS1–QS4. A tag sits on one slot only, so tagging another slot moves it.
2

Press the pad on the deck

Each deck column has a SCRATCH row of four pads, one per tag. Press one and its sample is on that deck from the start. The title reads SCRATCH and the line under it shows the parked tune and where it is.
3

Press it again

The tune comes back. Press a different pad instead and the sample swaps; the tune stays parked.
Where the tune waits depends on the decks:
  • This deck playing, the other idle: the tune is doubled onto the other deck and keeps playing there. Get that channel’s fader up before you press. On release this deck takes the tune back in sync, and the other deck returns to what it had.
  • Both decks playing: the tune runs on silently underneath and comes back in time.
  • This deck paused: the tune comes back to the exact frame.
Loading a track onto the deck, switching it to THRU, or doubling onto it drops the park. A loop on the tune doesn’t survive the park. Right-click a Quick Scratch pad while it’s off the deck for Rename…; it renames the SAMPLES slot behind it. A pad whose file is missing tells you which file is gone and won’t park your tune for silence.

The dub siren

Five shots, each on a pad drawn with its own waveform: Rifle Gun, Alarm, Sine, Laser, Siren. Click a pad to fire it. While it sounds, the heading names the shot. The siren is its own instrument with its own echo. It sounds with or without a track loaded, and echo out on the deck doesn’t touch it.

The DUB dial

Drag the dial up or down. As it turns it slows and deepens the shots and adds the siren’s echo: longer, louder and darker. DRY is no echo at all; double-click the dial to get back there. The dial reads DUB and a percentage, and it’s remembered between launches. The TAIL row under the pads shows the echo the dial has set: one segment per repeat, fading as the repeats do, with the delay in ms and the feedback in % beside it.

Beat-matching the echo

Turn on Beat-match the siren’s echo in Preferences ▸ FX. The echo then repeats once per beat at the deck’s tempo (or every half beat when a beat is longer than the echo can hold) instead of following the dial’s time.

Where the siren goes

The → A pill works like the sampler’s: the master deck by default, or right-click to pin Deck A, Deck B or A + B. The siren leaves on that deck’s output, into that channel of your mixer. Hide the box with Dub siren in Preferences ▸ FX.